CIRCUTOR QNA500 series - Manual (Page 60)

POWER QUALITY ANALYZER QNA500 8IO
QNA500 8IO Instruction manual 60 / 111
The information contained in the email is:
Alarm status (On / Off)
Alarm description
Date and time of activation
Alarm code
Value
Range of alarm assessment (MAX / MIN)
Activation time
Deactivation Time
ATTENTION: EMAIL account must not have SSL protocol. If this option is enable,
you must disable it to allow send emails of the power quality analyzer. Although
sending emails is done without SSL, mails are sent encrypted in a secure way.
• Battery: this option displays the power supply time of the internal battery during which the
module can operate. This time must be shorter than that programmed in the M-BASE module,
which is shaded. Each module can have a different disconnection time.
• Firmware: this option displays the firmware version of the microprocessor of the QNA500 8IO
module and the firmware of the associated DSP.