CIRCUTOR CVM-C10 Series - Manual (Page 59)

To validate the data, press for 3 seconds and the prog icon will disappear from the display.
Press key to access the next programming step.
 Device ID
The device ID is programmed on this screen.
Press the key for 3 seconds to edit the value. The prog icon
will be displayed on the bottom of the screen.
To enter or modify the value, press the
key repeatedly,
increasing the value of the flashing digit.
When the desired value is shown on the screen, press the key to go to the next digit and
modify the other values.
If you press the key after changing the last digit, it will jump back to the first digit so you
can modify the previously programmed values again.
Maximum programming value: 999999.
Minimum programming value: 0.
To validate the data, press for 3 seconds and the prog icon will disappear from the display.
Press key to access the next programming step.
 MAC
The MAC address is programmed on this screen.
Press the key for 3 seconds to edit the value. The prog icon
will be displayed on the bottom of the screen.
To enter or modify the value, press the
key repeatedly,
increasing the value of the flashing digit.
When the desired value is shown on the screen, press the key to go to the next digit and
modify the other values.
If you press the key after changing the last digit, it will jump back to the first digit so you
can modify the previously programmed values again.
Maximum programming value: 255.
Minimum programming value: 0.
To validate the data, press for 3 seconds and the prog icon will disappear from the display.
59 Instruction Manual
CVM-C10