CIRCUTOR PowerStudio Series - Manual (Page 14)

PowerStudio PowerStudio
14 User Manual
1.3.- TYPICAL APPLICATION
Below we show the steps required to create a typical application, configure the communications
engine, create the application from the editor, export the application and view the application from the
client.
1.3.1 Configure the communications engine
For the application to operate properly, the first step will be the configuration of the
communications engine. When the communications engine is installed the runtime ‘PSEngineManager’
application is copied to the same directory, and with this application can configure the engine's
operating parameters, such as the web server and the working directories.
Engine view, Engine Manager
This view only provides the engine view. To modify the parameters, we will use the Modify
button and the following dialog will appear:
Engine configuration, Engine Manager