3 engine/editor and clients, 4 engine, editors and clients, Engine/editor and clients – CIRCUTOR PowerStudio Series User Manual
Page 8: Engine, editors and clients
PowerStudio PowerStudio
8 User Manual
1.1.3 Engine/editor and clients
In this configuration we have an editor, an engine and one or more clients, each of these being
on different machines. This configuration allows the engine configuration to be edited remotely. This
configuration is used when we want the data downloaded from the devices by the engine to be
centralized in a machine that is independent of the editor machine.
1.1.4 Engine, editors and clients
This configuration is the same as the previous one with the only difference that it is possible to
edit an application from two machines at the same time. For example, the SCADA screens could be
configured from one editor and the reports from another. It is important that each editor must import
the engine configuration before new changes are made. When modifying the application and exporting
it to the engine, were any type of incongruity to occur with the engine application, we will be able to
correct it.