CIRCUTOR PowerStudio Series - Manual (Page 27)

PowerStudio
User Manual 27
 Element: Registers from each of the harmonics
♦ harmonic: Harmonics number
♦ value: Harmonic value.
• Waveform value record
<fieldFO>
<id> … </id>
<element>
<msec>… </ msec>
<value>… </ value>
</ element>
…
</fieldFO>
 id: Variable identifier (device.variable)
 Element: Information from each of the points that make up the waveform
♦ msec: millisecond
♦ value: value
• EVQ event Record.
<fieldEVQ>
<id> … </id>
<value>… </ value>
<phase>… </ phase>
<duration>… </ duration>
<averageValue>… </ averageValue>
<previousValue>… </ previousValue>
<eventType>… </ eventType>
<endForced>… </ endForced>
<semicycleVoltage>
<date>… </ date>
<value>… </ value>
</ semicycleVoltage>
…
</fieldEVQ>
 id: Variable identifier (device.variable)
 value: Value of the event:
 Phase: Phase in which the event occurs
 duration:Duration of the event in milliseconds
 averageValue: Average value:
 previousValue: Old value
 eventType: Type of event
♦ 0 Interruption
♦ 1 gap
♦ 3 Overvoltage
 endForced: Mark if the event has finished correctly (F) or has be forced to
finalise (T)
 semicycleVoltage: Each of the points that make up the semi-circular
effective voltage associated with the event. This field is optional and may not
exist.
♦ date: Date and time (DDMMYYYYHHMMSSUUU)
♦ value: Value
3.1.7 /services/user/events.xml?begin=…?end=…?id=…
Returns the events log of one or more events between dates “begin” and “end”. Each of the
events on which information is required must be included in the request as: