25 how do i show documents in response to an event, How do i show documents in response to an event, How can i solve this – CIRCUTOR PowerStudio Series User Manual
Page 39
PowerStudio
User Manual 39
3.2.25 How do I show documents in response to an event?
In a similar manner to the previous point, adding an action to run an external program and
entering the file to be shown (PDF, TXT, DOC, etc.) and its corresponding path. For the action to take
effect, you will need to have a program installed that can read this type of file (for example, Microsoft
Word, Adobe Acrobat Reader, etc.).
3.2.26 How can I communicate with a TCP2RS+ converter by way of a router?
To communicate with a TCP2RS+ converter located in a sub-network different to the network
in which the software is located, we can use a router as shown in the following image
The TCP2RS+ converter should be added as follows
1- Enter the router address (192.168.120.201)–In the “Converter Address” field.
2- Redirect ports ‘10001 ’and ‘30718’ in the router to the converter address (192.168.15.205)
(see router manual)
3.2.27 There are screens on which I cannot see the text of the controls properly
or they are truncated. How can I solve this?
The screens are designed to be properly viewed with a minimum size of 1024x768. You must
increase the size of the window to the recommended minimum size, if your screen is configured at
1024x768 you must maximise the screen.