2 t9 mid/high system, 1 t9 applications, 2 t9 technical specifications – KLING & FREITAG K&F ACCESS T9 User Manual

Page 11: T9 mid/high system, T9 applications, T9 technical specifications

Advertising
background image

User’s Manual

ACCESS SYSTEM

KLING & FREITAG GMBH ©1995-2009

Version 6.0, 17.03.2009

Page 11 of 60

3.2

T9 Mid/High System

3.2.1

T9 Applications

The ACCESS T5 is a horn-loaded high-end sound system with a consistent and homo-
geneous dispersion pattern of 90° x 40°. It is, therefore, extremely well suited for small
to medium coverage requirements with just one system per side such as live concerts in
clubs and sound coverage in discotheques. By using pair clusters with another T9 or
large arrays with the fully compatible T5, it is possible to use the equipment at large
events and mega open-air concerts. The T9 meets all demands at the highest level ---
from techno to classic. With wideband highest sound pressure up to 139 dB and an
optimal audio quality, a minimum number of units is necessary. This allows for maxi-
mum efficiency for set-up and dismantling.

3.2.2

T9 Technical Specifications

Design

2-way horn loaded

Frequency response -10 dB

100 Hz - 19 kHz (with Controller C5/9)

Frequency response ± 3 dB

130 Hz - 17 kHz (with Controller C5/9)

Nominal coverage angle

90° x 40° (hor. x vert.)

Directivity index (DI)

12 (+1.5/-1.5) 500 Hz - 20 kHz

Nominal power handling

500 watts low-mid, 120 watts mid-high

Sensitivity 1 W/1 m

108 dB low-mid, 110 dB mid-high

Max. SPL

139 dB (SPL peak/1 m)

Components

12" chassis with conical horn

5" compression driver with CD horn / 12‘‘ diaphragm

1.5" compression driver with CD horn / 3“ diaphragm

Crossover

All-pass filter optimises phase response and delay

time between the 5’’ and 12’’ driver

Impedance

5

Ω low-mid, 10Ω mid-high

Connectors

EP-5 male / female MID: 1+ / 2-, HIGH: 3- / 4+

Enclosure

Trapezoid with 2 cluster angles 4°/15°

15 mm birch plywood with highly resistant

black structured paint

4 ergonomic butterfly handles

4 100 mm transport castors mounted on the rear,

ball proof front grille with exchangeable black

acoustic foam

Rigging

2 MAN CF4T flying points, 2 MAN HWKB strap

attachments for securing straps

Dimensions

600 x 900 x 750 mm without castors (W x H x D)

Weight incl. Castors

92 kg

Options

Transport cover with butterfly catches,

MAN/K&F flying hardware, ATM modular cradle

system, special finish in RAL colours, All Weather /

Outdoor

version

Advertising
This manual is related to the following products: