KLING & FREITAG K&F ACCESS T9 - Manual (Page 14)

User’s Manual ACCESS SYSTEM
KLING & FREITAG GMBH ©1995-2009 Version 6.0, 17.03.2009 Page 14 of 60
4.1.4 Specification of the Fuses
The fuses in all models have the following identical specifications:
Bussmann S 506 Bussmann S 506 Bussmann S 506 Bussmann S 506----8A slow 8A slow 8A slow 8A slow
When necessary, these fuses may only be replaced with the aforementioned original fuse.
4.1.5 Replacement and Positions of the Short-Circuit Fuses
When the fuse is blown, then the chassis is most likely already ruined, as the fuse just
prevents consequential damage resulting from a short circuit of the chassis.
A disassembly of the chassis is, therefore, unavoidable.
The fuse holder of the subwoofers is mounted on the signal wiring behind the input
connector. The ACCESS subwoofers have 2 fuses; one for each of the parallel operating
chassis.
When replacing the fuse, the lid of the terminal with the signal connectors must be
screwed off to reach the fuse holder.
Warning