One Systems PT-10 - Manual (Page 24)

One Systems, Inc. 6204 Gardendale Dr., Nashville, TN 37215 www.onesystems.com 24
adjustments must be double checked and tightened after the loudspeaker has been
mounted.
Next, the loudspeaker should be mounted to the PT-30 using the supplied M8 stainless
steel bolts and internal tooth lock washers. DO NOT SUBSTITUE ANY PARTS.
PT-30 speaker mount bracket section
The PT-30 mounts to the top or bottom of the 108IM or 208CIM as shown in the figure
below using the M8 locations. The mounting locations are highlighted in red.
Note: Remove all 7 M8 cover plugs before installing the loudspeaker on the PT-30
bracket plate!
DO NOT SUBSTITUTE MOUNTING LOCATIONS!
PT-30 Mounting locations (top or bottom) for 108IM/208CIM