One Systems PT-10 - Manual (Page 8)

One Systems, Inc. 6204 Gardendale Dr., Nashville, TN 37215 www.onesystems.com 8
The image above shows the M10 bolts WITHOUT WASHERS used to mount either a
112IM, 212CIM, 212IM, or 312CIM. The M10 flat washers are used ONLY with the CFA
or CFA-2 enclosure!
Additionally, there are forged shoulder eyebolts supplied in the PT kits, 4 each M10
eyebolts for the PT-76a and 3 each M8 eyebolt for the PT-38a. One of these eyebolts
must be installed in the top, rear portion of the enclosure. When installing the PT-76a,
use the longer of the two M10 eyebolts for wood enclosures and the shorter of the two
M10 eyebolts for the IM series enclosures. Make sure that the eyebolt is seated on the
surface of the enclosure.
Figure 2c