Pinnacle Systems CA - Manual (Page 5)

We will not supply individual component parts of any circuit
board but will supply the individual circuit board complete.
Individual detectors or emitters are available as a complete
tested unit.
WARNING: The entire machine safety system must be
tested at the start of every shift. Machine testing should
include: (1) proper machine operation and stopping
capability; and (2) verifi cation of proper installation and
settings of all point of operation guards and devices
before the operation is released for production.
FILL THIS INFORMATION OUT IMMEDIATELY
Purchase Date: _____________________________
Model No.: _________________________________
Options: ___________________________________
Purchased From: ____________________________
Serial No.: _________________________________
Microprocessor Revision No.: __________________
This information will be needed in the event you
need assistance.