TabletKiosk Sahara Slate PC i400 Series - Manual (Page 57)

4 Chapter 04: Using Your Sahara Slate PC with Windows XP
Otherwise, enter the correct IP and DNS server addresses by
selecting the two options that begin with “Use the
following…” If you are unsure of which option to use,
contact your network administrator or your Internet Service
Provider (ISP).
7. After entering the correct the information in the “Internet
Protocol (TCP/IP) Properties” window, tap “OK” to accept
your changes and close the window. Tap “OK” in the “Local
Area Connection Properties” window to finish.
Using Both DHCP and a Static IP Address
If you are using alternating networks with either DHCP or static
IP addressing, you can use alternative settings that will enable
simultaneous configurations of both DHCP and a static IP. This
will allow you to connect to both of the networks without having
to reconfigure each time you want to switch.
1. Follow steps  through  above when using a wired LAN
connection.
2. Tap on the “Alternate
Configuration” tab and
select the “User
configured” option.
Enter the correct values
in the appropriate
fields. If you are unsure
of which values or
options to use, contact
your network
administrator or the
technical support line
of your ISP.
When you have completed the entire configuration, tap “OK” to
accept the settings and close the panel.