TabletKiosk Sahara Slate PC i400 Series - Manual (Page 80)

Chapter 05: Using Your Sahara Slate PC with Windows Vista 
connections”, and look at the “Local Area Connection” item
and make sure it reads as “Enabled”. If not, recheck that your
networking cable is properly connected, or contact your
network administrator.
4. Press and hold the
“Local Area
Connection” item
and select
“Properties” from the
pop-up menu that
appears, or if the
Status window
appears, tap the
“Properties” button.
If Windows asks you
for permission to
continue, tap on the
“Continue” button.
5. Under the General Tab,
you’ll see a list box
called “This connection
uses the following
items:” Select “Internet
Protocol Version 4
(TCP/IPv4)”, and tap
the “Properties” button
to open the “Internet
Protocol (TCP/IP)
Properties” window.
6. If DHCP is used on
your network, tap
“Obtain an IP address
automatically” and
“Obtain DNS server address automatically”. Otherwise, enter
the correct IP and DNS server addresses by selecting the