TabletKiosk Sahara Slate PC i400 Series - Manual (Page 98)

Chapter 07: Upgrading Your Sahara Slate PC 
Out of the box, your new Sahara Slate PC is a powerful, mobile
companion capable of accomplishing a wide variety of tasks
with speed and precision. Depending on your system’s
configuration, there are still ways to make your Tablet PC do
more and do it faster.
This chapter will focus on the procedures for upgrading, and/or
replacing, your computer’s memory (RAM), storage capacity
(hard disk drive) and wireless networking card.
Before you Begin ANY Upgrade Procedure
Before attempting to add or remove any components within the
Sahara Slate PC it is important that you always observe the
following conditions/procedures:
1. Power off your computer, remove the power cable from the
computer and remove the battery. Refer to the section
entitled To Remove the Battery Pack.
2. Disconnect any networking cables, modem cables and
cables connected to other powered devices.
3. When disconnecting a cable from the computer, always pull
on its connector, not on the cable itself. When reconnecting
a cable, make sure that both the connector and the
corresponding pins are aligned properly with the cable
before attempting to secure it in place.
Chapter
07
Upgrading Your Sahara Slate PC