TabletKiosk Sahara Slate PC i400 Series - Manual (Page 81)

 Chapter 05: Using Your Sahara Slate PC with Windows Vista
two options that begin
with “Use the
following…” If you are
unsure of which option
to use, contact your
network administrator or
your Internet Service
Provider (ISP).
7. After entering the correct
the information in the
“Internet Protocol (TCP/IP)
Properties” window, tap
“OK” to accept your
changes and close the
window.
8. Repeat steps 
through  selecting
“Internet Protocol
Version  (TCP/IPv)
this time if your
network supports it.
9. Tap “OK” in the “Local
Area Connection
Properties” window
to finish.
Using Both DHCP and a Static IP Address
If you are using alternating networks with either DHCP or static
IP addressing, you can use alternative settings that will enable
simultaneous configurations of both DHCP and a static IP. This
will allow you to connect to both of the networks without having
to reconfigure each time you want to switch.
1. Follow steps  through  above when using a wired LAN
connection.
Contact your network administrator
or ISP technical support if you are
unsure about any of these settings.