Channel info – Televes Serie H-30 User Manual
Page 12
H30 - CATV & DOCSIS3.0 Meter / Analyzer
12
Upload speed
Download
speed
Received
data size
Modem
status
Modem IP
Transmitted
data size
1.5. Setup
The features in this menu, allows you to set the
required parameters to analyze a DOCSIS network.
You can access to Setup menu by pressing
button.
- Tuning mode: Auto, Manual.
If Auto is selected, the H30 automatically
searches for the DOCSIS network channel. If you
select Manual, you must select one channel from
the Channel list
- Channel: Allows you to select the channel when
Manual is selected in the Tuning mode.
- FTP: These parameters allows to set the ftp to do
the Throughput test.
FTP Server: Enter the ftp address using
.
FTP Path: Enter the file path using
.
Method: GET, PUT.
GET selects the upstream channel and
PUT select the upstream for the FTP Test
in the Troughput test feature.
User: Enter the user for the FTP server.
Pass: Enter the appropriate password for the for
the FTP server user.
2. Channel Info
Analog and digital channels are very different in
terms of signal content and power distribution
and thus require the advanced SLM techniques
provided in the Televes H30.
In analog mode, video and audio levels, V/A and
Carrier to Noise (C/N) are measured.
In digital mode it´s Power, C/N, Pre-BER and
Post-BER.
2.1. Main window
Below is a capture of a Channel Info window with a
brief explanation of its features.