Televes Serie H-30 - Manual (Page 23)

EN
23
2. Firmware update
Following are details to update the firmware of
your H30.
Important:
- You need to have a connection to the internet.
- Configure your network parameters (see section
1.- Network setup).
1.- Connect the H30 to the external power supply
using the source provided with the meter.
Connect the H30 to the Internet.
2.- In the main menu, select the function “Setup”.
Then, select “Update firmware”.
3.- Press OK and the select “On”. Press OK again to
select the On option.
4.- Turn the meter off by pressing the “Device On/
Off” button for some seconds.
5.- The meter will connect to our server, download
the new firmware and install it in your H30. This
process will take around five minutes.
6.- When the installation is complete, press the OK
button to reboot the meter.
Note: When your H30 connects to the server to
update the firmware, it checks in our database if you
have purchased any of the available options. If so,
they will be activated automatically with the update.