Toyotomi FF-V30T - Manual (Page 20)

GENERAL DESCRIPTION: The FF V30T is designed to be installed in an outside wall so the full advantage of in-
stallation simplicity can be made with the “Flue Pipe”, which eliminates the need for tall chimney type flues. No
hearth or fire surround is required. While some Flue pipe wall extentions are available, they complicate installation.
Read and understand the limitations of Flue pipe wall extension options. (See Page 20.)
STANDARD INSTALLATION PARTS
The following standard installation parts are enclosed with heater. For alternate installation methods, you may need
to purchase additional accessories which are available from your TOYOTOMI dealer. See “Accessory Parts”.
L-shaped Hose (2) (PART #17185292)
Pipe Holder (1) (PART #17212685)
Flue Pipe (1) (PART #17224296)
Exhaust Air Cap (1) (PART #17212661)
Intake Air Cap (1) (PART #17212656)
Wood Screw (3)
(PART #17206066)
Bent Joint (L) (1)
(PART #17212698)
Insulating Cover
(PART #17212687)
Wall Bracket (2 sets) (PART #17212589)
Tapping Screw (1) (PART #17208678)
Bind Tapping Screw (1) (PART #17187555)
Wood Screw (1) (PART #17206066)
Hose Band (2) (PART #17212677)
(Hose Clamp) Inlet Hose (1) (PART #17212693)
Manual Fuel Pump (1) (PART #17027727)
Pipe Stopper (1) (PART #17212678)
(3)
SECTION I:
INSTALLATION
19
FF_V30T_Type B_US.qxd 14.6.2 11:51 ページ 19