UEBO M100 Portable 1080p - Manual (Page 14)

Note: HDD format will remove all data stored on the hard disk drive. Make sure to backup
all data before proceeding.
Restore Default
• Select to restore factory defaults.
2.1.2 Changing Audio Settings
Use this menu to configure audio settings
Night Mode
• Choose between OFF / ON / COMFORT. Choosing the ON option will enable you to
decrease the audio output volume.
HDMI Output
• Choose between HDMI LPCM / HDMI LPCM Multi-ch / HDMI RAW mode. This option will
determine if Player will decode the audio signal. Player will decode the DTS or Dolby audio
signal from your video file if HDMI LPCM or HDMI LPCM Multi-ch option is selected.
Player will not decode the DTS or Dolby audio signal if HDMI RAW is selected. Usually
this option is selected if the HDMI cable is connected to the home stereo system that is
capable of decoding DTS or Dolby signal.
2.1.3 Changing Video Settings
Use this menu to configure video settings.
Aspect Ratio