UEBO M100 Portable 1080p - Manual (Page 18)

Step 2: Specify your host IP
WPS (AP)
WPS, Wi-Fi Protected Setup, is used to connect to a wireless router directly, without searching
for a SSID and inputting password. In this mode, you just need to configure the
parameters of
your router which support WPS function. There are two modes for you to select, PBC mode
and PIN mode.
PBC: First press the WPS button on the router or select the button mode in the configuration
menu of the router, then select the PBC mode. The testing process can take a couple
minutes to establish a connection.
PIN: Input the pin code when configuring your router, and then select PIN mode. The testing
process can take a couple minutes to establish a connection.
SAMBA
• Select to turn on/off SAMBA server which allows you to share files over your network from
your computer to the Player and vice versa.
Host Name
• Select to key in your desired host name to be seen in your network.
2.1.5 Miscellaneous
Use this menu to adjust miscellaneous settings.