WaveWare WiPath PDR-3000 - Manual (Page 2)

4. Plug the PDT/PDR into a 12-volt supply and plug in the DB9 plug into the
back of the PDT/PDR.
{PDTP does not read or write to the PDT/PDR unless instructed to do so. It is
recommended that unless you need to change the basic template of the PDT/PDR then
you download the settings from the unit first. Click on the “Download From Pager”
button. This will download the current settings from the PDT/PDR. It will also
ensure that the template was selected correctly. The template will change to that
contained in the PDT/PDR if it was not selected correctly when you opened PDTP.
If you need to change the basic template of the PDT/PDR do not do a download. Just
select your template, change the settings and press “Upload To Pager” (Please
consult }
The Main PDTP Window
Note the main window will look slightly different for different templates e.g the PDR
templates include a button for alert settings and setting the time.