wePresent WiPG-1500 - Manual (Page 23)

23 Chapter 9 DoWiFi for Windows
→Back
9.5 Connect to Receiver Device
1. WiPG-1500 application will search and list the WiPG-1500 receiver Device. You
can select the target receiver device and press “OK” button to connect the
selected receiver device.
2. You can press the “Refresh” button to search again.
3. If you can’t find the target receiver device from the list, you can press the “Manual”
button to enter the receiver IP address manually and connect.
9.6 Login
1. When it connects to a “Code” protection enabled WiPG-1500 receiver, you have to
enter the “Code” and press the “Connect” button to login the receiver.
(You can find the CODE from the right-upper of OSD standby screen)
2. If you want to connect to another receiver or cancel the login, please press the
“Cancel” button.