Analog Way MIDRA PLATFORM TPP Current Programmer's Guide - Manual (Page 5)

5
PROGRAMMER'S GUIDE FOR v01.02.11
1 INTRODUCTION
This document provides information and guidance to control Midra™ products directly from controllers
without using the standard RCS². A basic knowledge of the machine is necessary, using the RCS².
TPP stands for Third Party Protocol.
1.1 References

Midra_TPP_commands_for_v01-02-11.xls Midra™ v01.02.11 TPP command set

Midra™ v01.02.11 firmware updater (on ANALOG WAY web site)

EIKOS2 reference manual (on ANALOG WAY web site)

EIKOS2 quick start guide (on ANALOG WAY web site)
1.2 Notices
Pictures and drawings are non-contractual.
Specifications are subject to change without prior notice.