1 artm 8310_base, Introduction – Artesyn ARTM-831X Installation and Use (June 2014) User Manual
Page 29
Introduction
ARTM-831X Installation and Use (6806800M76E)
29
1.2.1
ARTM 8310_base
Base PCB
Four 10/100/1000Base-T Ethernet interfaces (Rj45)
10Gb Ethernet interface via SFP+ pluggable transceiver
Synchronous Ethernet (locked to 25MHz SyncCLK from System Synchronizer)
–
All four 10Base-T and 100Base-TX mode ports
–
All four 1000BASE-T mode ports when configured as master Tx/Rx
–
Both 10GBASE-LRM mode ports
–
Both 1000BASE-LX/SX (1GBE bypass) mode ports
CLK synchronization options (recovered receive CLK to Reference-CLK selection as input
source to the system synchronizer):
–
BITS (2x, RJ45) option installed on base board
–
One of either 10Gb Ethernet ports
–
One of four 100/1000BASE-T ports
IP only version (without expansion board):
–
Synchronous Ethernet
–
No BITS option installed
–
No SFP for OC3 and expansion option