Artesyn COMX-P2020 BSP User Guide (July 2014) - Manual (Page 17)

Chapter 3
COMX-P2020 BSP User Guide (6806800L84B) 17
Get and Install the ToolKit and BSP
3.1 Getting and Installing the ToolKit
The ToolKit is not provided. To get the ToolKit, follow the steps below:
1. It is strongly recommended for BSP users to contact Freescale to get the LTIB for
P2020RDB (P2020-RDB - LTIB BSP ISO (DVD3) ) which can be found at Freescale's website:
http://www.freescale.com/webapp/sps/site/overview.jsp?nodeId=0127260061033202
A572C1
. The package includes not only the BSP for P2020RDB, but also the toolkit for
process of Freescale's P2020. (If the file is deleted from the website, please contact
Freescale).
2. The installation guide of the toolkit can be found at
\help\Documents\pdf\P2020RDB_BSP_UserManual.pdf of the iso file. Please refer to
Chapter 2: LTIB Basic in the P2020RDB_BSP_UserManual.pdf to install the toolkit. Only
after running ltib, can the toolkit be installed at the directory:/opt/freescale
3. After installing the toolkit, create a soft link for /opt/freescale:
[percy@localhost ~]$ cd /opt
[percy@localhost opt]$ sudo ln -s freescale freescale-p2020
or change the directory /opt/freescale to /opt/freescale-p2020:
[percy@localhost ~]$ sudo mv /opt/freescale /opt/freescale-p2020
3.2 Getting and Installing the BSP
1. Please contact Artesyn for the tar ball of BSP source file: COMX-2020.src.tar.gz and copy it
to the home directory of the user.
2. As a non-root user, uncompress the file COMX-P2020.src.tar.gz.
[percy@localhost ~]$ tar zxvf COMX-P2020.src.tar.gz