Artesyn COMX-P2020 BSP User Guide (July 2014) - Manual (Page 94)

Start Linux
COMX-P2020 BSP User Guide (6806800L84B) 94
please change this password using the 'passwd' command
and then edit this message (/etc/issue) to remove this message
COMX-P2020 login: root
Password:
[root@COMX-P2020 root]#
6.4.3 Starting Kernel with Ramdisk Using FAT16 Partition
By default, the SD Card will contain FAT16 partition on partition 1, as shown in the above table.
To boot from this FAT16 partition, execute the following command:
=> run sdfatboot
Device: FSL_ESDHC
Manufacturer ID: 1b
OEM: 534d
Name: 00000
Tran Speed: 25000000
Rd Block Len: 512
SD version 2.0
High Capacity: No
Capacity: 2002780160
Bus Width: 4-bit
reading uImage