Artesyn COMX-P2020 BSP User Guide (July 2014) User Manual
Page 82
Advertising
Start Linux
COMX-P2020 BSP User Guide (6806800L84B)
82
Welcome to the LTIB Embedded Linux Environment
!!!!! WARNING !!!!!!!
The default password for the root account is: root
please change this password using the 'passwd' command
and then edit this message (/etc/issue) to remove this message
COMX-P2020 login: root
Password:
[root@COMX-P2020 root]#
6.3.3
Starting kernel with Ramdisk using FAT16 partition
By default the USB stick will contain FAT16 partition on partition 2, as shown in the above table.
To boot from this FAT16 partition, execute the following command:
=> run usbfatboot
(Re)start USB...
USB: Register 10011 NbrPorts 1
USB EHCI 1.00
scanning bus for devices... 3 USB Device(s) found
Advertising