Start linux – Artesyn COMX-P2020 BSP User Guide (July 2014) User Manual
Page 85
Start Linux
COMX-P2020 BSP User Guide (6806800L84B)
85
COMX-P2020 login: root
Password:
[root@COMX-P2020 /root]#
6.3.4
Starting the Kernel with Ramdisk using ext2 Partition
By default the USB stick will contain ext2 partition on partition 4, as shown in the above table.
To boot from the partition 4, execute the following command:
=> run usbext2boot
(Re)start USB...
USB: Register 10011 NbrPorts 1
USB EHCI 1.00
scanning bus for devices... 3 USB Device(s) found
scanning bus for storage devices... 1 Storage Device(s) found
Loading file "uImage" from usb device 0:4 (usbda4)
................................................................
........................................3416476 bytes read
Loading file "comx.dtb" from usb device 0:4 (usbda4)
.9824 bytes read
Loading file "rootfs-dev.ext2.img" from usb device 0:4 (usbda4)
.......................
................................................................
................................................................