Artesyn COMX-P2020 BSP User Guide (July 2014) - Manual (Page 28)

BSP Build Environment
COMX-P2020 BSP User Guide (6806800L84B) 28
4.2.4 Compile Device Tree Bolb
1. To compile the device tree bolb, run the command: "make dtb" at the P2020 BSP directory:
[percy@localhost p2020]$ make dtb
make -C linux/kernel -f Makefile dtb
make[1]: Entering directory `/home/percy/p2020/linux/kernel'
make -C current -f blackadder.mk dtb-clean
make[2]: Entering directory `/home/percy/p2020/linux/kernel/linux-
2.6.32'
rm -f /local/tftpboot/COMX-P2020/current/comx.dtb
make[2]: Leaving directory `/home/percy/p2020/linux/kernel/linux-
2.6.32'
make -C current -f blackadder.mk dtb
make[2]: Entering directory `/home/percy/p2020/linux/kernel/linux-
2.6.32'
rm -f /local/tftpboot/COMX-P2020/current/comx.dtb
dtc -f -b 0 -I dts -O dtb -p 1024 -o /local/tftpboot/COMX-
P2020/current/comx.dtb arch/powerpc/boot/dts/blackadder.dts
DTC: dts->dtb on file "arch/powerpc/boot/dts/blackadder.dts"
make[2]: Leaving directory `/home/percy/p2020/linux/kernel/linux-
2.6.32'
make[1]: Leaving directory `/home/percy/p2020/linux/kernel'
[percy@localhost p2020]$
2. If the build is successful, the device tree bolb: comx.dtb can be found at the output
directory.
[percy@localhost p2020]$ ls -al /local/tftpboot/COMX-
P2020/current/comx.dtb
-rw-rw-r-- 1 percy percy 9824 Dec 13 11:35 /local/tftpboot/COMX-
P2020/current/comx.dtb
[percy@localhost p2020]$