ATEIS ECS User Manual
Page 28
Advertising
ECS MANUAL
Version EN.1
28
AEC WITH ONE DEVICE
Schematic:
The only difference with the previous chapter, is that here the both AEC components are in the same
ECS.
The schematic is the same, only the room separation has been moved:
There is an AEC component on the both microphones, in order to send a proper signal to the
other side. The reference signal of the AEC is the signal coming from the other side, called far-end
signal.
Design in the ECS:
Regarding the schematic of a point to point system, here is the corresponding design using one
ECS device. It must be created with Ateïs Studio software.
Advertising