ATEIS ECS - Manual (Page 46)

ECS MANUAL
Version EN.1
46
Design in the ECS :
Regarding the basic schematic above, here is the corresponding design which must be created
with Ateïs Studio software.
The TC Transmit component is the interface between the local microphone (or audio sources)
and the telephone line. Its input has to be linked to an input component where the microphone is
physically connected to the ECS.
The TC Receive component is the interface between the local listening system (loudspeaker) and
the telephone line. Its output has to be linked to an output component where the listening system is
physically connected to the ECS.
You can use any input/output channels of the ECS.
TELEPHONE CARD COMPONENT
The telephone card component allows using the ECS as a telephone interface.
In the ECS configuration design, the telephone card consist of a TC transmit component and a TC
receive component. When your PC with Ateïs Studio software is connected live with the ECS, the TC
transmit and TC receive component offer a telephone interface allowing you to manage the
telephone call.
TC Transmit Component
The TC transmit component provides the telephone keypad with the standard functions of a
telephone.
The component is split in two parts:
The "User Telephone Area", allowing you to type a telephone number, to start the call and to
stop it.
The "Machine status Area", which contains several status led showing you the current state of
the interface.