ATEIS ECS User Manual
Page 48
ECS MANUAL
Version EN.1
48
TC Receive Component
The TC receive component allows to see the incoming call with the DTMF Decoder and provides
also some controls. Here you can adjust the audio level of the incoming caller signal and of the
incoming ringing signal that you will hear in the speaker connect to the TC receive output.
The auto-answer function is available, allowing the ECS to automatically answer the incoming call.
A Noise suppression can be activated, and also a line echo cancellation in order to reduce the
noise and the echo due to the telephone line.
Machine Status Area Parameters
Parameter
Range
Comment
Caller signals / Mute
Button/led
Mute the caller signal
Caller signals / Level
-15 to 12(dB)
Level control of the caller signal
Ring signals / Mute
Button/led
Mute the ring signal
Ring signals / Level
-15 to 12(dB)
Level control of the ring signal
Auto-answer
Active the auto-answer function, by selecting after how many
rings the ECS will answer.
Noise suppression
Button
Active the noise suppression on the caller signal
DTMF decoder /
enabled
Button/led
Enable the DTMF decoder
DTMF using
Light when a DTMF signal is detected
DTMF history
Display the last DTMF signal received
Line echo cancellation
Button
Active the echo cancellation on the line