ATEIS ECS - Manual (Page 5)

ECS MANUAL
Version EN.1
5
- Airports
- High raise buildings
- Hotels
- Restaurants
- Shopping center and Malls
- Theme parks
- Places of worship
- Stadia
- Museums
- Industrial buildings
- Industrial plants
- Commercial buildings
ECS PRESENTATION
The ATEÏS ECS is the new Ateïs processor which includes the echo cancellation component in more
than general functions of UAPg2 and LAPg2.
Designed for
Conference application , the ECS is the new DSP audio Matrix for medium paging
application and multi zone audio routing.
According to its powerful audio numerical signal treatment the
ECS can easily be used in an exigent
environment requiring audio quality.
Thanks to its Ethernet port you can easily connect and pilot the ECS through an IP network or direct
from a PC by using RJ-45 connector.
ECS's programming is done through convivial software Ateïs Studio based on graphical Windows®
design environment. The signal path is defined by adding DSP components (Equalizer, Gate,
Compressor, delay...), simply inserted in a clear and easy graphical window by "drag en drop"
operation. You can recreate a complex audio system in a simple 1U space machine. Forget the
addition of machines that required racks and too much long cables in the past.
Once programmed, you can pilot your system through PC, VITY, Crestron or AMX. You can also
disconnect the PC and the networked devices run as a standalone system; however it can be
controlled through a range of controllers (logical TTL Input, logical TTL Output, analogical inputs,
RS485 network). Wall mounted source selectors, smart controllers and programmable paging mikes
are available.