ATEIS ECS - Manual (Page 41)

ECS MANUAL
Version EN.1
41
Adjust signal coming from the other side
3) Make proper adjustment of the input sensitivity of the far-end signal coming from the other
side on the input component.
4) In the AEC 2, adjust the volume level of far-end signal coming from the other side with Near-
End parameter.
5) Make proper adjustment of the volume level of the Mixer until the audio from the other side
is clear and without feedback noise.
6) In the AEC 2, make proper adjustment of Background Noise Threshold, then To Press Noise
reduction Enable button to make noise reduction working.