ATEIS ECS - Manual (Page 47)

ECS MANUAL
Version EN.1
47
User Telephone Area Parameters
Machine Status Area Parameters
Parameter Range Comment
Send Button Start the telephone call
Finish button Stop the telephone call
Current Number display Display the current target telephone number
Last Number display Display the previous target telephone number
Back Button Not available
ReDail Button Re-start the last telephone call
Flash Not available
Parameter Range Comment
Dialling led Light when the call is established, until the end of the call.
Connect led
Ringing led Light when the telephone is ringing on the other side
Busy led Light when the telephone line is busy on the other side
Set led Light when you pick up the telephone (if there is one)
MCU led Not available
Ready led Light when the telephone line is properly connected to the ECS
Fault led Light when the telephone line is not connected to the ECS
Mute button Mute the telephone line (mic)
Level -15 to 12(dB) Control the volume level of the microphone