36 operation – Avalon Firestyles 616 Diamond-Fyre User Manual

Page 36

Advertising
background image

36 Operation

© Travis Industries

4140811

100-01331

Manual On-Off / Smart Thermostat / Standard Thermostat

Use the thermostat button to cycle through the three thermostat settings (see Figure 6).

Figure 6

MANUAL ON/OFF – The burner will turn on and off using the remote (see Figure 7). Press the

On/Off button to control the burner. When off, the display will only show the current temperature.

Figure 7

SMART THERMOSTAT – While in Smart Thermostat mode, the transmitter will control the

burner to achieve the target temperature (see Figure 8 below). Flame height will be adjusted up
or down to allow operation without turning the burner on and off (also called “smart modulation”).
To adjust the target temperature, press the UP and DOWN buttons until a suitable temperature is
achieved.

Figure 8

STANDARD THERMOSTAT - While in Standard Thermostat mode, the transmitter will turn the

burner on and off to achieve the target temperature (see Figure 9 below). To adjust the target
temperature, press the up and down buttons until a suitable temperature is achieved.

Figure 9

NOTE: If the transmitter batteries go dead while in thermostat setting (standard or smart), the appliance
will shut off after approximately 24 hours.

ON

F

OFF

ON

SMART

Look here for the

thermostat setting.

Press the thermostat button to cycle

through the thermostat settings.

F

OFF

When in manual setting, the

word "OFF" will appear here.

F

When in smart thermostat

setting, the word "SMART"

will appear here.

This is the target

temperature on the read-

out. Use the up or down

buttons to adjust the target

temperature.

SMART

F

ON

When in standard thermostat

setting, the word "ON" will

appear here.

This is the target
temperature on the
read-out. Use the up or
down buttons to adjust
the target temperature.

Advertising
This manual is related to the following products: