Avalon Firestyles 564 HO GS2 Installation - Manual (Page 47)

Optional Equipment (
for qualified installers only)
47
Travis Industries 4150330 100-01408
4. Install the LP pilot orifice following the directions below.
(a) Use a 7/16” open-end wrench to remove the pilot hood.
(b) Remove and discard the Natural Gas (NG) orifice. Place the LP orifice in the pilot assembly then
replace the pilot hood, tightening the pilot hood until it is snug (do not over-tighten).
5. Remove the concealment cover. Unscrew the four screws holding the control cover in place. Carefully remove
the control cover and place face down to access the regulator.
a
b
7/16" Wrench
Natural Gas Orifice = .020N (3way)
.018N (2way)
LP (Propane) Orifce = .014LP
.020N
or
.018N
.014LP