Aviosys 9258HP - Manual (Page 28)

- 28 -
Second : Go to "Wake up Settings " under " Ping Settings "" of " Power Control settings " and
setup : enable , IP address and the times of ping failures.
As above picture , the pink value 0 next to the Ping Failures value 6 means the exact pig
failure times is zero time . As the pink value reach to the setting value , device will action as
setting .
Connectivity Alarm :
The section allow you to enable or disable the alarm as lost network connectivity.
As enable this function , 9258HP will keep beeping if it`s own network connectivity lost.
PC Control Settings
The section allow you to control PC shutdown and wake up in LAN .