B.C. Time Recorders Simplex Bravo/Combo/100 - Manual (Page 17)

P
ROGRAMMING
12
To Set the Print Time Format
Select the print time format by choosing the number on the display which corresponds to the
desired format. As each format number is shown on the display, the number of printed character
positions used is shown in the upper right-corner of the display. The total number of characters
used for printing is shown in the lower left-corner of the display.
Line Format Print Number of
Characters
12 hour, minutes PM 2:47 6
12 hour, tenths PM 2.8 5
12 hour, hundredths PM 2.78 6
12 hour, minutes, seconds PM 2:47:45 9
24 hour, minutes 14:47 5
24 hour, tenths 14.8 4
24 hour, hundredths 14.78 5
24 hour, minutes, seconds 14:47:45 8
A. Press
CHANGE once.
B. Press
ACCEPT until the programming arrow appears below TIME.
Press CHANGE once.
• The
TIME option begins to blink. Using the examples above, choose a print time format.
Press the CHANGE button until the desired option number is displayed.
D. Press
ACCEPT to set the PRINT TIME FORMAT option shown on the display.
• The programming arrow moves to the next option (go to Step C of To Set the Print
Comment).
C.