B.C. Time Recorders Simplex Bravo/Combo/100 - Manual (Page 20)

P
ROGRAMMING
15
To Set the Starting Number
After selecting the REPEAT option in the previous step, the programming arrow appears next to
STARTING NUMBER. Select from 0 through 999999.
A. Press
CHANGE once.
B. Press
ACCEPT until the programming arrow appears next to STARTING NUMBER.
Press CHANGE once.
• The
STARTING NUMBER begins to blink.
Press CHANGE until the desired number is displayed.
D. Press
ACCEPT to set the STARTING NUMBER shown on the display.
• The programming arrow moves to the next option (go to Step C of To Change Daylight
Saving Time [DST] AHEAD).
To Change Daylight Saving Time (DST) AHEAD
Use the following steps to set the day(at 2:00 AM) on which the Simplex 100 will set the time
ahead one hour to DST.
A. Press
CHANGE once.
B. Press
ACCEPT until the programming arrow appears next to AHEAD.
Press CHANGE once.
• The week number begins to blink.
Press CHANGE until the desired number (1st, 2nd, 3rd, 4th, or last week of the month) is
displayed.
Press ACCEPT to set the number shown.
• The month begins to blink.
Press CHANGE until the desired month is shown.
Press ACCEPT to set the month shown.
• The day begins to blink.
Press CHANGE until the desired day of the week is shown.
D. Press
ACCEPT to set the DST AHEAD options shown on the display.
• The programming arrow moves to the next option (go to Step C of To Change Daylight
Saving Time [DST] BACK).
C.
C.