Baby Lock Anna (BL20A) Instruction and Reference Guide - Manual (Page 28)

22
b
z
x
c
b
v
q
w
e
r
t
y
Threading the Machine
To set the needle thread:
Raise the presser foot.
Raise the thread take-up lever to its highest
position by turning the handwheel toward you.
z Draw the thread from the spool and guide
it under the thread guide from the back to
front.
q Thread guide
x Draw the thread down along the right
channel and pull it up around the bottom of
the thread guide plate.
Pull the thread up along the left channel.
w Right channel
e Thread guide plate
r Left channel
c Firmly draw the thread from right to left over
the thread take-up lever and down into the
take-up lever eye.
t Thread take-up lever
v Draw the thread down along the left channel
and slip the thread behind the needle bar
thread guide from the left.
y Needle bar thread guide
b Pass the thread through the needle eye from
the front to the back.