Baby Lock Anna (BL20A) Instruction and Reference Guide - Manual (Page 40)

34
q
w
Seam guides on the needle plate and hook cover
plate
The seam guides on the needle plate and hook
cover plate help you to measure seam allowance.
The numbers indicate the distance between the
center needle position and the seam guide.
q Seam guides
Turning a square corner
The cornering guide helps you maintain a 5/8” (1.6
cm) seam allowance when sewing a corner.
When the fabric edge facing you lines up with the
cornering guide as illustrated, stop stitching and
lower the needle into the fabric by turning the
handwheel toward you.
Raise the presser foot and pivot the fabric so the
edge of the fabric will align with the 5/8” (1.6 cm)
seam guide.
Lower the presser foot and start stitching in the new
direction.
w Cornering guide