Becker MAP PILOT OPERATION GUIDE - Manual (Page 27)

27
NAVIGATION MODE >>>
> D
> GB
> F
> I
> E
> P
> NL
> DK
> S
> N
> FIN
> TR
> GR
> PL
> CZ
> H
> RUS
> Press the Select category button.
The points of interest categories available
for the entered city are displayed.
> Select the desired point of interest as de-
scribed under “POI nearby/POI near
destination” on page 26.
Entering a POI directly
> In the POI menu, select
POI search by
name .
> Enter the desired point of interest or
part of the name.
> To confirm the previous input, select
or press and hold the rotary con-
trol/push button.
The Becker® MAP PILOT displays in a
list all the points of interest corresponding
to the name entered.
> Select the desired destination from the
list.
> Select Start guidance to begin route
guidance to the point of interest straight
away.
Selecting a destination from the
map
You can select a destination straight from
the map.
> Select
Select on map from the destina-
tion input menu.
The map display appears.
> Search for the desired position.
> Press the rotary control/push button.
Note:
If you have already entered an address,
this address will appear by default.
Note:
You can also select
Select POI . An input
menu will then open and you can enter
the name of a point of interest directly
and confirm it.
Note:
The search radius is limited to 200 kilo-
metres around your current position.
A maximum of 50 points of interest are
displayed.
Note:
Turn the rotary control/push button to
change the scale of the map display.
Push the rotary control/push button to
move the displayed cursor to the desired
position.