Becker TRAFFIC ASSIST Z101 - Manual (Page 19)

19
GERNARAL OPERATION >>>
> D
> GB
> F
> I
> E
> NL
Unit bracket
The Traffic Assist can be attached directly
to the windscreen with the unit holder.
Suction surface
Lever
Base
Fastening screw
Carrier plate
Clip
Fitting the unit bracket
Note:
The Traffic Assist and unit bracket must
not be exposed to long periods of direct
sunlight. Temperatures inside the vehicle
of +70 C and higher may damage parts of
the bracket.
2
1
3 4
6
5
1
2
3
4
5
6
Note:
Fasten the unit holder such that your
field of vision is not impaired when the
Traffic Assist is installed and ensure that
the unit is outside the deployment area of
the airbag.
Ensure that the electrical connection ca-
ble does not hamper you from accessing
the vehicle's controls.
Clean the attachment surface on the
windscreen to ensure that it is clean and
free of grease. Do not use greasy or soapy
cleaning agents.