Becker TRAFFIC ASSIST Z101 - Manual (Page 45)

45
NAVIGATIONAL MODE >>>
> D
> GB
> F
> I
> E
> NL
The Energy key
Your Traffic Assist may be operated using
an external power supply unit or using an
integrated rechargeable battery.
The energy supply and its condition is vis-
ualised using the status display.
The status display can be called up using
the following button.
> Push the button Energy .
The status display is called up and
the energy supply is visualised.
The charge condition is displayed using
the level gauge. In the example, the bat-
tery still has a charge of two thirds of its
capacity.
The charging operation is indicated by the
mains socket symbol in the status display.
Ending the status display
By pushing the button
OK the status dis-
play is ended and the setting menu ap-
pears.
The Volume key
With the Volume settings window, you
can set the general volume for voice an-
nouncements for each start of the Traffic
Assist, or switch off voice announcements
completely.Depending on the situation,
you can also adjust the volume in the map
display.
> Press
Volume in the settings menu.
The Volume settings window appears.
> The required volume can be selected via
the and buttons.
> Confirm your settings by hitting the OK
key.
Note:
The current charge condition is particu-
larly important when operating from bat-
teries. If there is insufficient energy, then
the navigational aid cannot be main-
tained until the destination is reached,
for example.