Becker TRAFFIC ASSIST Z101 - Manual (Page 28)

28
>>> NAVIGATIONAL MODE
> D
> GB
> F
> I
> E
> NL
Rapid access
Rapid access allows you to select from the
key functions to quickly start navigation.
Rapid access is illustrated below using
sample destinations.
Structure of rapid access
Destination input menu and map display
In fast access mode, the
Destination input
button is displayed in the top line, on the
left.
To the right of this, you will find a key
featuring a map symbol. This is used to
change over to map viewing mode.
The list of destinations is shown in the
lines under this.
The list of destinations
The list of destinations displays all the des-
tinations available for quick selection line-
by-line. If you have already entered your
home address, you can start route guid-
ance to your home address in the first line.
Each line is split into two boxes. Each list
box is depicted as a key. The destination is
named on the right-hand key and its char-
acteristics shown in the left-hand icon.
Note:
On delivery, a few destinations (places of
interest in Europe) are already stored on
the unit.
Note:
The last 100 destinations are automati-
cally stored in the destinations list. Once
the memory's capacity has been fully used
up, the oldest destination is automatical-
ly deleted whenever a new one is entered.
Important destinations can however be
protected.