Becker TRAFFIC ASSIST Z101 - Manual (Page 37)

37
NAVIGATIONAL MODE >>>
> D
> GB
> F
> I
> E
> NL
> Press the button to start route
guidance to the entered coordinates.
Starting navigation
The
Start button can be used to start nav-
igation straight away. All the data entered
so far is processed in the route calculation.
> Press the
Start key to start navigation.
The route is calculated. The map display
then appears and directions to the destina-
tion begin.
Motorways
Ferries
Toll roads
Select one of the options
by pressing the relevant
button:
•
Permitted - the road
type is taken into
account during route
calculation.
• Avoid - the road type is
avoided wherever
possible.
• Block road - the road
type is not taken into
account during route
calculation.
Option Meaning
Note:
If no GPS signal is available at the time of
route calculation, the following display
appears.
If the GPS signal is available, route calcu-
lation is started automatically.
A short route to the selected destination
is displayed when
Simulation is pressed.