Becker TRAFFIC ASSIST Z101 - Manual (Page 50)

50
>>> NAVIGATIONAL MODE
> D
> GB
> F
> I
> E
> NL
Using TMC
Once you have connected the TMC an-
tenna, your Traffic Assist will receive cur-
rent traffic announcements and dynamic
route calculation will be enabled (traffic
jam diversion). You can also view traffic
announcements directly.
To preset the TMC, See "The Routing
options key" on page 43.
> In the map display, activate the toolbar
(see also page 55) and press TMC .
The message list appears.
You can scroll through the list using the
arrow keys
on the right–hand
edge of the screen.
The road number (motorway, A-road or
district roads), section of road if applica-
ble, traffic direction and the type of prob-
lem are displayed in each traffic message.
Reading a message
> Press on the desired message in the list.
The message display appears.
If the message text is longer than the
display space available, the
button
appears at the bottom right.
> Press this button in order to view the
remaining message text.
> Press the arrow buttons to
scroll in the messages.
> Press the key to return to the
message list.