Beisler 2112-4 - Manual (Page 45)

- C 45 -
Short Seam Automat 2112-4 Working Instructions Beisler Automated Sewing Equipment
C.5
Maintenance
WARNING - Electric shock:
Contact with current-carrying components may cause
a lethal electric shock.
If the machine is put in motion accidentally, persons
in its direct vicinity may be caught by moving parts
which may cause injuries.
Prior to any service, cleaning or maintenance works,
disconnect the machine from the power supply sy-
stem!
•
Turn the machine off using the main switch.
• Remove power plug from socket and protect it
against accidental reconnection.
• If the power supply is not required for repair or set-
up work, the machine must be disconnected from
the power supply system.
C.5.1 Inspection
The machine must be inspected annually.
The inspection comprises particularly the following items:
•
safety devices of the machine,
• operativeness of the program control,
• correct function of inputs and outputs.
C.5.2 Cleaning
The machine must be cleaned after large production se-
ries, or at least once a day, whichever occurs first.
Cleaning the machine surfaces:
1. Disconnect machine from power supply system.
2. Remove fabric residues.
3. Using compressed air, blow off dust and thread resi-
dues at the sewing head, at the working plate, at the
clamp and at the linear rail.
4. Wipe machine parts dry using a dry, clean cloth.
NOTE - Plastic surfaces!
Some parts of the machine surfaces are made of plastic
materials. Solvents may dissolve plastics and make them
unusable.
Do not clean the machine surfaces (particularly the ope-
rating panel) with cleaning agents that contain solvent.