Beisler 2112-4 - Manual (Page 9)

- A 9 -
Short Seam Automat 2112-4 Working Instructions Beisler Automated Sewing Equipment
A.1.3 General safety instructions
Correct use
• The SHORT SEAM AUTOMAT 2112-4 is a sewing
machine. It is to be used for:
• Crimping over and tucking of pocket edges.
• Clipping the slash selvage and sewing the slash
selvage to the left trousers component.
• Sewing the slash selvage to the right trousers com-
ponent.
• The maximum length of the pocket edge to be proces-
sed is 300 mm. If the machine is equipped with an
optional, oversized crimping over and insertion station,
the maximum length of the pocket edge to be proces-
sed is 400 mm.
• The machine can be used for processing all conventio-
nal materials for outerwear.
• The machine has been designed for permanent opera-
tion in industry.
• The SHORT SEAM AUTOMAT 2112-4 has been tested
for electromagnetic compatibility and is suited for instal-
lation in industrial operating rooms.
Incorrect use
•
The SHORT SEAM AUTOMAT 2112-4 must not be
operated in rooms that do not comply with the location
requirements.
• The SHORT SEAM AUTOMAT 2112-4 must not be
operated in the vicinity if devices or systems that pro-
duce strong magnetic fields as otherwise the correct
function of the program control may be impaired.
Safety requirements
•
DIN EN, Part 1:1991-11, Part 2:1995-06
Safety of machines
• DIN EN 60601, Part 1:1994-05
Safety regulations for electrically operated measuring
and control installations, general requirements.
• DIN EN 50178 (VDE 0160): 1998-04
Equipment of power systems with electronic devices
• DIN EN 50082 (VDE 0839) Part 2:1997-11
Electromagnetic compatibility, basic specification,
immunity to interference.
Part 1: Domestic, business and commerce, small
enterprises.
Part 2: Industry.
• DIN EN 60204 (DIN VDE 0113): 1993-06
Electrical equipment of industrial machines
A.1
Safety instructions
Safety devices
The SHORT SEAM AUTOMAT 2112-4 is equipped with a
circuit-breaker (program stop switch) that stops all ma-
chine movements and the sewing process when actuated
manually.
Power supply connection
The power supply of the machine is established with a
properly grounded power supply connection with:
•
230 V ± 10 %, 50/60 Hz, grounding plug.
• Fusing: 16 A
• Power consumption: 1.3 kW
Compressed air supply
The machine must be supplied by an on-site compressed
air source.
•
Operating pressure: 6 bar.
• Compressed air quality: oil-free
• Compressed air consumption: 12 NL
Location and storage requirements
Installation in sheltered, closed rooms.
•
Room temperature: +10 °C to 45 °C
• Relative humidity: 80 % max.
Disposal
•
Please discard the packaging material in accordance
with existing disposal directives. Section C1, Delivery
of the machine, contains a list of the packaging mate-
rials used.
• The machine contains reusable materials. Therefore,
when discarding the machine, ask your local magi-
strate or community office about the possibilities of
recycling.